I consider, that you are mistaken. Let's discuss. Write to me in PM.
Adapt-a-Tees can be used in many situations where you need an extra line. They come in various sizes to suit whatever situation you have. You will also need a longer flex water supply tube to run from the water pipe to the refrigerator. Measure the distance carefully, and buy a supply tube with plenty of length for the job. First, locate the shutoff valve under the kitchen sink where you want to connect the new water line. Shut off the water at the valve that controls the cold-water supply pipe to the faucet.
If there are no fixure shutoff valves, you can turn off the water by closing the main water supply valve to the entire house.
The tee adapter connects to the water supply shutoff valve. Continue to 2 of 7 below. Continue to 3 of 7 below.
Continue to 4 of 7 below. Disconnect the Existing Water Line. Disconnect the faucet supply tube from the shutoff valve. Use two sets of pliers to safely remove the tube—one to hold the valve and one to unscrew it. Thread the water line, included in the ice maker installation kit, from the area behind the refrigerator to beneath the sink.
Leave the excess water line behind the refrigerator. Turn on the cold water faucet to drain any water left in the supply line. Use pliers to untwist the faucet supply line from the cold water supply valve.
Wrap threads on the cold water valve with two or three wraps of thread-seal tape.
Connecting a water line for a refrigerator icemaker and water Running a water line to a refrigerator to supply its ice maker and drinking water. Here is a step-by-step water line installation refrigerator guide. A new refrigerator with a water dispenser and ice maker needs to be hooked up. A refrigerator with an automated ice maker and a built-in water dispenser does absolutely nothing if you do not have a water line to connect to it.
Twist the male end of a quick-tee adapter onto the valve. Wrap the female thread on the opposite end of the adapter with thread-seal tape.
Refrigerator ice and water hook up
Twist the faucet supply line onto the female end of the adapter. Slip the compression nut that came with the kit over the newly installed supply line. Make sure the threads are facing the end of the line. Thread the ferrule from the kit onto the new line.
ateliersjisseo.com: Water Line Hookup and Installation Kit for Refrigerators and Ice Makers: Kitchen & Dining.
Wrap the remaining male threads on the quick-tee adapter with thread-seal tape. Insert the new water line into the opening on the tee.
Slide the compression nut over the male threads and tighten it on the adapter. Tighten all three nuts on the quick-tee adapter with pliers or an adjustable wrench.How to Connect an Ice Maker - Cheap & Easy
Do not twist the nuts too tight as this could damage the supply valve, the supply line and the adapter. Customers also shopped for. Page 1 of 1 Start over Page 1 of 1. Have a question? There was a problem completing your request. Please try your search again later. Post your question. Compare with similar items.
Inline Water Filter Kit for Refrigerators. Product information Product Dimensions 8.
Feedback If you are a seller for this product, would you like to suggest updates through seller support? Would you like to tell us about a lower price? See questions and answers.
Share your thoughts with other customers. Write a customer review. Showing of 13 reviews. Top Reviews Most recent Top Reviews. There was a problem filtering reviews right now. Verified Purchase. Working great.
One person found this helpful. Works great.
How to Install an Icemaker
Missing the t connector, doesn't accept returns. This isn't what I need and they won't take it back. High quality, easy to install, works well. As with any water line to a refrigerator, check your connections, and recheck them, before you push the refrigerator back in.
A leak of a drop per day might be more than 2 quarts per month. Great Instructionsdid it myself--and the instructions were perfect. This package comes with everything you need for your water powered refrigerator. So easy even an incompetent person like me only took 15 minutes to get it all set up. See all 13 reviews.
Imagine the convenience of having cold water or ice cubes any time you want them -- no more filling up pitchers to keep in the refrigerator or waiting for ice cube. Feed the line down, and then up through the refrigerator hole. Now that the water line has been run to the refrigerator, it's time to do what's called the . screws to secure the unit to the freezer wall, and then add the ice bucket under the kit. Having a refrigerator with a water and ice dispenser is very convenient. To get the best performance, connect the water supply line. There is a chance that you.